Skip to content

WiFi surveys · Germany · Europe/Berlin

WiFi site survey in Munich.

Munich buildings vary widely, from masonry walls in the historic centre to glass offices, research labs and trade fair halls. Deploris sends a vetted local engineer with Ekahau tools to survey your Munich site, so access points are placed from measurement and modelling rather than guesswork, and you receive heatmaps and a clear written report.

Last reviewed October 2026. No lock-in contracts.

Munich at a glance

  • Predictive, on-site and validation surveys
  • Ekahau survey tools and project files
  • Heatmaps, access point plan and bill of materials
  • Quote and scope in writing, no lock-in

Quick answer

What is a WiFi site survey in Munich?

A WiFi site survey in Munich measures or models how wireless signal behaves in your building so access points can be placed correctly. We run predictive surveys from floor plans, on-site surveys that measure real signal and interference, and validation surveys after installation. You receive heatmaps, access point locations and mounting guidance, and a written summary.

SCOPE

What a WiFi survey covers in Munich.

The survey type depends on whether the building exists, whether a network is already installed, and how much certainty you need before spending on equipment.

Predictive surveys

  • Floor plan import and scale check
  • Wall, floor and glass materials modelled in the planning tool
  • Estimated access point count, positions and channels
  • Early budget numbers before you buy hardware

On-site surveys

  • Walk of every area with calibrated survey equipment
  • Signal strength, signal to noise ratio and channel overlap measured
  • Interference from neighbouring networks and non-WiFi sources recorded
  • Access point on a stick tests to confirm planned positions

Validation after installation

  • Coverage checked against the agreed design targets
  • Roaming behaviour checked while walking key routes
  • Dead zones and weak areas flagged with photos
  • Fixes listed with the access point and location to change

Reporting

  • Heatmaps for signal strength, signal to noise and channel use
  • Access point locations, mounting heights and antenna orientation
  • Bill of materials for access points, cabling and mounts
  • Executive summary with prioritized recommendations

OPTIONS

Which survey fits your building.

Predictive survey

Modelled from drawings. Best for new builds, fit-outs and early budgeting. It is fast but depends on accurate plans and material data.

On-site survey

Measured in the real building. Best for existing offices, warehouses and sites with difficult construction or interference.

Validation survey

Measured after installation to prove the network meets the design. Best for handover, audits and complaints about coverage.

CONTEXT

Why Munich teams commission WiFi surveys.

A wireless design that works in one Munich building can fail in the next. Older buildings in central districts often have thick masonry walls and vaulted or tiled ceilings that absorb and reflect signal in ways a floor plan does not show, while newer offices in areas such as Schwabing and Riem lean on glass, metal-framed partitions and open floors that create their own reflections and interference. Predictive models need correct material data for each, and an on-site check of a few representative rooms often settles which assumptions to trust. That is why we ask for photos of wall types, ceiling construction and existing mounting points alongside the floor plans.

Munich also has building types that are hard to cover from standard office templates. Research and laboratory spaces on the campuses north of the city contain instruments and metal fittings, trade fair and event halls have very high ceilings and large crowds, and industrial sites serving the automotive and engineering sectors have machinery, racking and scanners. Each needs different mounting heights, antenna choices and capacity planning. Validation after installation is just as useful here: a floor that looked fine when empty can behave differently once a full workforce or a crowd of visitors arrives, and the report should show where the margin is thin.

Munich's IT estate is shaped by long-established industrial and insurance employers, a large engineering and research community, and a steady flow of technology offices run by international firms. Many organisations here run mixed environments: a headquarters or research campus in the city, plants and warehouses across the wider Bavarian region, and equipment in colocation facilities on the edges of the city or in neighbouring towns. IT teams are often small relative to the estate they support, so physical work tends to be planned carefully and documented well.

Geography matters as well. Munich sits close to the Alps and has cold winters, so deliveries, travel between sites and outdoor loading can all be affected by the weather. Buildings range from historic stock in the centre to modern office and campus developments in districts such as Schwabing and Riem, and to the research area around Garching to the north. Business is conducted in German and English, and customers often want work notes in English while site paperwork stays in German. Deploris coordinates vetted local engineers for these environments through one manager.

PRICING

What drives the price.

We quote in writing per engagement. These are the factors that move the number.

  • Floor area, number of floors and number of sites
  • Survey type: predictive, on-site, validation or a combination
  • Building complexity, such as warehouses, healthcare or dense construction
  • Depth of reporting and whether you need the full bill of materials
  • After-hours access, travel and any re-survey after installation

ACCESS

Getting access to your Munich site.

Surveys need the engineer to walk every area. Building rules in Munich can add steps, so we plan them with you first.

01

Certificates and approvals

Many Munich office buildings and campuses ask contractors to send company details, an insurance certificate and a list of named workers before arrival. Property managers may also want a short method statement for cabling or drilling. We prepare these documents with you ahead of the visit.

02

Loading docks and lifts

Older central buildings often have limited goods access, small lifts and restricted delivery times, while newer campuses tend to have staffed docks with booking systems. Deliveries and cable drums should be booked with building management, with lift protection requested where the building expects it.

03

Quiet hours and holidays

Some buildings limit noisy work during the working day, and Sundays and public holidays are often closed to contractors. Public holidays can differ between German states, so we check the local calendar when planning evening and weekend windows with your facilities team.

What to send before the survey

  • Floor plans in CAD, PDF or image form, with scale if known
  • Site address, floors and the areas that must have coverage
  • Device types, expected user counts and any high-density areas
  • Applications that matter most, such as voice, video or scanners
  • Existing wireless vendor, model and any current access point locations
  • Access hours, escort needs and any safety or privacy restrictions

PROCESS

How a survey runs.

  1. 1

    Scope the requirements

    We agree the site, areas, device types and the survey type, and confirm the plans and access you will provide.

  2. 2

    Plan the survey

    The engineer prepares the project file, checks scale and materials, and books access with your site contact.

  3. 3

    Survey the building

    The engineer models or measures coverage area by area and records interference, obstructions and mounting options.

  4. 4

    Analyze the results

    Measurements are checked against your targets and access point positions are adjusted until the design meets them.

  5. 5

    Deliver the report

    You receive heatmaps, the placement plan, a bill of materials and the project file, with a walkthrough of the findings.

RELATED

The case studies are representative scenarios, not named clients.

FAQ

WiFi site survey in Munich: frequently asked questions.

Why do older buildings in Munich need an on-site WiFi survey?
Older buildings often have thick walls, vaulted ceilings and renovations that are missing from the plans, so a model alone can mislead. An on-site survey measures what the structure really does to the signal. It also shows where access points can be mounted without harming the fabric, which building owners often care about.
Can you survey a Munich warehouse or production hall?
Yes. Large halls with high ceilings, racking and moving equipment need mounting heights, antennas and channel plans chosen for them. The engineer walks the space with the survey tools, records interference from machinery and other systems, and notes any lifting equipment you need to provide for ceiling-height positions.
Can you plan WiFi for events or temporary capacity in Munich?
We can survey venues, meeting halls and temporary spaces for high-density use, usually as a predictive plan backed by a short on-site check. Event demand is hard to simulate, so we agree device counts and applications with you and flag where extra capacity would be needed on the day.
What is the difference between a predictive and an on-site WiFi survey in Munich?
A predictive survey models coverage from drawings, so it works before a building exists or before hardware is bought. An on-site survey measures real signal in the finished building, so it finds problems the drawings cannot show. Many projects use both.
Which tools do you use for WiFi surveys?
Our surveys use Ekahau tooling. You receive the project file along with the heatmaps and report, so another team can reopen and extend the work later.
Do you need access to the whole building?
For an on-site survey, yes: the engineer has to walk every area that needs coverage. For a predictive survey we mostly need plans and a short site visit to check materials and mounting options.
Can you survey after the access points are installed?
Yes. A validation survey measures the installed network against the design targets and lists the changes needed. It is often used for handover and for troubleshooting coverage complaints.
How is a WiFi site survey priced in Munich?
Pricing is scoped per engagement and depends on floor area, survey type, building complexity and reporting depth. There is no lock-in contract. Send the floor plans and the requirements and we will return a written quote.

QUOTE

Request a WiFi site survey in Munich.

Share a few details and we will come back with the next steps.

Get started

Planning WiFi in Munich? Send us the floor plans.

Tell us the sites, the scope and the timeline. We reply with a written plan.

Go to

Saved and recent pages stay on this device. Press ? for keyboard shortcuts.

Keyboard shortcuts

Search the site
/ or Ctrl K
Show this list
?
Switch light, dark or system theme
t
Save or unsave this page
s
Go to the home page
g then h
Go to services
g then s
Go to coverage
g then c
Go to the contact form
g then q

Shortcuts are off while you type in a field.